How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Master A.S.E Automotive technician
Category: Chevy
Satisfied Customers: 9176
Experience:  A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician
6408229
Type Your Chevy Question Here...
John is online now
A new question is answered every 9 seconds

How to remove headlight assembly for a 2008 3500 hd silverado

Customer Question

how to remove headlight assembly for a 2008 3500 hd silverado
Submitted: 6 years ago.
Category: Chevy
Expert:  John replied 6 years ago.

Hello & Welcome to JA,

Here is info to help you.

 

Headlamp Replacement (Chevrolet)
Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the upper radiator grille. Remove the front Right or Left wheelhouse liner. Behind the headlamp at the top of the front bumper access the lower inside hidden headlamp bolt.
  2. Loosen the bolt only, do not remove, the lower outside hidden headlamp bolt attached to the lower front fender bracket.

1

Headlamp Screws (Qty: 2)

Tighten
Tighten the screws to 6 N·m (53 lb in)

2

Headlamp Screw (Hidden)

Tighten
Tighten the screws to 6 N·m (53 lb in)

3

Headlamp Housing Support

Procedure

  1. Apply masking tape to the front bumper end caps to protect the painted surface.
  2. For the right side lamp assembly only, disengage the upper retainer for the radiator air baffle.
  3. Release the headlamp from the support tab, rotate the lamp assembly towards the center of the vehicle.
  4. Disengage the headlamp electrical connector from the forward lamp harness.

 

Object Number:(NNN) NNN-NNNN Size: MF

 

Object Number:(NNN) NNN-NNNN Size: MF

John and other Chevy Specialists are ready to help you
Customer: replied 6 years ago.
i need to know how to remove whole assembly not just headlamp.
Expert:  John replied 6 years ago.
This is to remove the headlamp assembly.
Expert:  John replied 6 years ago.
  1. Remove the upper radiator grille.
  2. Remove the front Right or Left wheelhouse liner.
  3. Behind the headlamp at the top of the front bumper access the lower inside hidden headlamp bolt.
  4. Loosen the bolt only, do not remove, the lower outside hidden headlamp bolt attached to the lower front fender bracket.

Related Chevy Questions