How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask goodwrench9124 Your Own Question
goodwrench9124
goodwrench9124, ASE Certified Technician
Category: Chevy
Satisfied Customers: 3432
Experience:  Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified
5720312
Type Your Chevy Question Here...
goodwrench9124 is online now
A new question is answered every 9 seconds
Chevy

A 2010 Silverado and my check engine light..remote start..aftermarket

I have a 2010 Silverado... Show More
I have a 2010 Silverado and my check engine light just came on i took it to Auto Zone and the code was P069E they told me i would have to take it to the dealer my question is i have a remote start installed and an aftermarket radio will this voip anything with my truck
Submitted: 6 years ago.
Category: Chevy
Show Less
Ask Your Own Chevy Question
replied 6 years ago.

Hello and welcome. code P069E is a code for a fuel pump control module fault. the aftermarket equipment wont void your warranty, however if the problem directly relates to the aftermarket equipment, then the repairs wont be covered by the factory warranty. botXXXXX XXXXXne. GM will only cover repairs that are GM equipment only. at this point, i don't see the radio being a issue. but I have seen a few aftermarket remote starts cause some issues.

 

If there is anything you don't understand, or you have more questions, Please feel free to ask me!



Edited by goodwrench9124 on 9/26/2010 at 4:57 PM EST
Customer reply replied 6 years ago.

There was also another code that they said came up it was P2534 do you know what that is caused by

goodwrench9124, ASE Certified Technician replied 6 years ago.

This code is a voltage code for the transmission, this code is almost always set by a aftermarket remote start set up.

 

DTC P2534: Ignition 1 Switch Circuit Low Voltage

Circuit/System Description

The transmission control module (TCM) samples the system voltage on the Ignition 1 voltage circuit every 0.1 seconds. Lower than normal voltage may be inadequate to operate the transmission control solenoids properly. Improper solenoid operation may cause erratic transmission operation, which may result in internal damage.

goodwrench9124, ASE Certified Technician replied 6 years ago.
I just had a thought, can you post me your vin number? some of these vehicles have a option for add on factory remote start system that works real well

Related Chevy Questions