How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JOHN aka Eauto Your Own Question
JOHN aka Eauto
JOHN aka Eauto, The Car Guy
Category: Chevy
Satisfied Customers: 15758
Experience:  ase tech
6149662
Type Your Chevy Question Here...
JOHN aka Eauto is online now
A new question is answered every 9 seconds

Where is the flasher unit in a 2001 chevy blazer

Resolved Question:

Where is the flasher unit in a 2001 chevy blazer
Submitted: 6 years ago.
Category: Chevy
Expert:  JOHN aka Eauto replied 6 years ago.

HAZARD AND TURN SIGNAL FLASHER REPLACEMENT

REMOVAL PROCEDURE

Attachments are only available to registered users.

Register Here

  1. Open the glove box to expose the glove box retaining tab (1).
  2. Lift the retaining tab and allow the glove box to hang freely.

Attachments are only available to registered users.

Register Here

  1. Using a suitable flat-bladed tool, release the plastic retainer that retains the hazard/turn signal flasher (1) to the C203 body harness connector (2).
  2. Remove the hazard/turn signal flasher (1).

INSTALLATION PROCEDURE

Attachments are only available to registered users.

Register Here

  1. Install the hazard/turn signal flasher (1) to the C203 body harness connector (2).
  2. Install the plastic retainer and ensure the hazard/turn signal flasher will not work its way loose over time.

Attachments are only available to registered users.

Register Here

  1. Lift the glove box retaining tab (1) to install the glove box to its original position.
  2. Close the glove box.



Attachments are only available to registered users.

Register Here

JOHN aka Eauto and 8 other Chevy Specialists are ready to help you
Customer: replied 6 years ago.
Thank you. I was able to change the flasher, however, that didn't fix my problem. The directional when you engage it on the drivers side flashes very fast. The passenger side is normal. It was suggested to me to be the flasher unit. But there is no change with the new unit.
Customer: replied 6 years ago.
Thank you.  I was able to change the flasher, however, that didn't fix my problem.  The directional when you engage it on the drivers side flashes very fast.  The passenger side is normal.  It was suggested to me to be the flasher unit.  But there is no change with the new unit. 
Customer: replied 6 years ago.
Thank you.  I was able to change the flasher, however, that didn
Customer: replied 6 years ago.
Is there anything else I can try?

Thank you. I was able to change the flasher, however, that didn't fix my problem. The directional when you engage it on the drivers side flashes very fast. The passenger side is normal. It was suggested to me to be the flasher unit. But there is no change with the new unit.
Customer: replied 6 years ago.
Is there anything else I can try?

Thank you.  I was able to change the flasher, however, that didn't fix my problem.  The directional when you engage it on the drivers side flashes very fast.  The passenger side is normal.  It was suggested to me to be the flasher unit.  But there is no change with the new unit. 
Customer: replied 6 years ago.
Is there anything else I can try?

Thank you.  I was able to change the flasher, however, that didn

Related Chevy Questions