How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 18326
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

2003 chevy silverado 2500: the oil pressure sending unit located

This answer was rated:

where is the oil pressure sending unit located on a 2003 chevy silverado 2500hd with a 8.1l engine in it?

The Oil Pressure Sending unit is on the top, rear of the engine, just below the EGR Valve. You will need a special socket - Oil Pressure Sender Socket - to remove it. You can usually buy this socket fairly cheap at any local parts store.


Attachments are only available to registered users.

Register Here

Ron Z. and 8 other Chevy Specialists are ready to help you