How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ZZDaryl Your Own Question
ZZDaryl, Chevy Technician
Category: Chevy
Satisfied Customers: 12547
Experience:  28 year experience, Master Mechanic
Type Your Chevy Question Here...
ZZDaryl is online now
A new question is answered every 9 seconds

2004 blazer: you remove the a/c clutch..nut

Resolved Question:

how do you remove the a/c clutch on a 2004 blazer. it doesn't have a typical nut to remove.
Submitted: 6 years ago.
Category: Chevy
Expert:  ZZDaryl replied 6 years ago.

There are special tools required to pull the clutch assembly off the compressor and to install it back on, below is a pic of the tool and how it pulls the clutch off, these tools should be available at any auto parts store.



Edited by zzdaryl on 8/8/2010 at 10:10 PM EST
Customer: replied 6 years ago.
i have the puller that the parts store loans out, but it looks like there is some kind of keeper on the shaft with a keyway and i can't tell how to remove that keeper before i can pull it off the shaft. or does the the tool do that somehow.
Expert:  ZZDaryl replied 6 years ago.
There are 3 different models of compressors for this vehicle, 2 have a snap ring that needs to be removed then the puller just pulls the clutch assembly off, the other one without a snap ring just gets pulled off.
ZZDaryl and 4 other Chevy Specialists are ready to help you

Related Chevy Questions