How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hal Your Own Question
Hal
Hal, Chevy Master Tech
Category: Chevy
Satisfied Customers: 1031
Experience:  ASE and Chevy Master , 31yr Dealership exp,
39646262
Type Your Chevy Question Here...
Hal is online now
A new question is answered every 9 seconds

How do you remove the center console in a 2004 chevrolet i

This answer was rated:

How do you remove the center console in a 2004 chevrolet impala?

Hi my name isXXXXX need to remove the trim around the shifter first. here are the instructions I hope this will help you , if not please let me know. thanks HAL

 

Removal Procedure


    Object Number: 601593  Size: SH
    Click here for detailed picture of above image.
  1. Apply the park brake.
  2. Shift the transaxle shift lever from Park to 2.
  3. Open the storage compartment door.
  4. Carefully pry the rear of the trim plate away from the front floor console.
  5. Pull the trim plate towards the rear of the vehicle in order to disengage the front of the trim plate.
  6. Disconnect the electrical connector at the rear of the front floor console trim plate.
  7. Rotate the trim plate 180 degrees. Lift the trim plate over the shift control handle.
  8. Disconnect the wiring harness retainers from the trim plate.
  9. Disconnect the wiring harness.
  10. Disconnect the cigar lighter electrical connector.
  11. Remove the ashtray.
  12. Remove the front floor console trim plate.
  13. Removal Procedure


      Object Number: 615823  Size: SH
      Click here for detailed picture of above image.
    1. Remove the trim plate from the front floor console. Refer to Front Floor Console Trim Plate Replacement .
    2. Remove the following front floor console bolts:
    3. Near the instrument panel (IP)
      At the transaxle shift control lever
      Under the mat in the rear bin
    4. Pull the console rearward in order to disengage the clips from the IP.

    5. Object Number: 615736  Size: SH
      Click here for detailed picture of above image.
    6. Disconnect the electrical connectors.
    7. Remove the front floor console.

    Installation Procedure

Hal and 6 other Chevy Specialists are ready to help you