How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 15694
Experience:  15 years GM master tech
19513769
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

2008 TAHOE ODOMETER LIGHTS AND prnd LIGHTS NOT WORKING

This answer was rated:

2008 TAHOE ODOMETER LIGHTS AND prnd LIGHTS NOT WORKING. I have a good mechanical ability and want to see how to and what parts it will take to fix this. The odometer panel is out all the way... the PRND is very dim
do all the gages work properly?fuel.temp.ect..?does the back lighting light behind the other gages?
Customer: replied 6 years ago.
Yes seems to be just these two places
more than likely what is wrong is the gauge cluster is bad its self.the odometer is internally run by the cluster its self it uses the same power and grounds that it does for all the other gages and indicators.and since they are working fine the cluster needs to be changed.if you get one to put in the new one HAS to be programed with a scan tool.any shop can do this that has programing capability.i wish i had better news for you.
Customer: replied 6 years ago.

Do you have specific instructions on replacing the cluster?

 

yes

try this should work out just fine!

after this is off 4 screws holding in the cluster then slide it out towards you and unplug it

graphicgraphic

Gary and 6 other Chevy Specialists are ready to help you