it is the vehicle identification number on your registration or title or the tag that is in the windshield on the dash should be 17 numbers and letters combined
Important: Do not remove the valve body for the following procedures. Removal of the 1-2 accumulator is necessary only if servicing the pressure control solenoid.
Notice: Refer to Fastener Notice in the Preface section.
Ensure that the electrical tabs are facing outboard.
Tighten Tighten the pressure control solenoid retaining bolt to 11 N·m (97 lb in).
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.