How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Super Mechanic Your Own Question
Super Mechanic
Super Mechanic, Master technician
Category: Chevy
Satisfied Customers: 16852
Experience:  29 yrs. exp., ASE master, cert. in G.M. electrical, a/c, susspension, brakes, electronic steering
Type Your Chevy Question Here...
Super Mechanic is online now
A new question is answered every 9 seconds

How do i replace a rear a/c blower motor on a 2000 chevy tahoe

This answer was rated:

how do i replace a rear a/c blower motor on a 2000 chevy tahoe

Hello and welcome to Just, Super mechanic here. About your vehicle.

Rear Quarter Trim Panel Replacement (Utility Right)

Removal Procedure

  1. Remove the rear seat.
  2. Remove the Third Pillar trim panel.
  3. Remove the garnish molding.
  4. Remove the door sill plate.
  5. Remove the quarter panel trim screws.


  1. Remove the quarter panel trim from the vehicle. Lift the quarter panel to release the quarter panel from the vehicle.
Installation Procedure

  1. Install the quarter panel trim to the vehicle. Notice: Refer to Fastener Notice in Service Precautions.
  2. Install the quarter panel trim screws. Tighten the quarter panel trim screws to 2 N.m (18 lb in).
  3. Install the door sill plate.
  4. Install the garnish molding.
  5. Install the Third Pillar trim panel.
  6. Install the rear seat.

Blower Motor Replacement - Auxiliary


  1. Remove the right rear quarter trim panel.
  2. Disconnect the electrical connectors.
  3. Remove the blower motor screws.
  4. Remove the blower motor (1) from the auxiliary HVAC module (2).
  5. Remove the retaining clip from the fan cage.
  6. Remove the fan cage from the blower motor.

  1. Install the fan cage to the blower motor (1).
  2. Install the retaining clip to the fan cage.
  3. Install the blower motor (1) to the auxiliary HVAC module (2).
  4. Install the blower motor screws.
  5. Connect the electrical connectors.
  6. Install the right rear quarter trim.

Customer: replied 6 years ago.
which blower motor is the correct one to order for replacement

The only thing that I have is the factory part numbers. According to the application.



Auxiliary Blower Motor
Blower Motor12475857

Super Mechanic and 2 other Chevy Specialists are ready to help you

Related Chevy Questions