How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, mechanic
Category: Chevy
Satisfied Customers: 15880
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Chevy Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

REPAIR OR REPLACE RT. FRONT DOOR LATCH 1998 S10 BLAZER

Customer Question

REPAIR OR REPLACE RT. FRONT DOOR LATCH 1998 S10 BLAZER
Submitted: 7 years ago.
Category: Chevy
Expert:  Tim's Auto Repair replied 7 years ago.

hi

this should help

thanks

 

Inside Door Handle

 

Front Door Inner Handle

Remove or Disconnect

Tool Required:
J 34940 Rivet Gun

 

  1. Door trim panel
  2. Water deflector.
  3. Inside door handle rod.
    • Drill out the rivets that secure the inside door handle to the door.
  1. Inside door handle from the door.

Install or Connect

  1. Inside door handle to the door.
  2. Rivets that secure the inside door handle to the door.
  3. Water deflector.
  4. Door trim Panel.
Customer: replied 7 years ago.
WHAT YOU ARE SHOWING ME DOES NOT LOOK ANYTHING LIKE WHAT I SAW IN PANEL
Expert:  Tim's Auto Repair replied 7 years ago.

this is a 98...let me try a different picture

thanks

 

Door Handle Replacement - Front Inside

REMOVAL PROCEDURE


 

  1. Remove the door trim panel
  2. Remove the inside door handle rods.
  3. Remove the inside door handle retaining rivets.
  4. Remove the inside door handle from the door by sliding the handle rearward.

INSTALLATION PROCEDURE


 

  1. Install the inside door handle to the door by sliding the handle forward. Ensure that the handle is properly seated.
  2. Install the inside door handle retaining rivets.
  3. Install the inside door handle rods.
  4. Install the door trim panel
Customer: replied 7 years ago.
THE VISUAL AIDS i AM SEEING IS NOT EVEVEN HAVE ANYTHING TO DO WITH THE DOOR THEY HAVE SPARK PLUNGS PULLEYS AND OTHE THINGS THEN ROD OR HANDLES