How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask goodwrench9124 Your Own Question

goodwrench9124
goodwrench9124, ASE Certified Technician
Category: Chevy
Satisfied Customers: 3431
Experience:  Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified
5720312
Type Your Chevy Question Here...
goodwrench9124 is online now
A new question is answered every 9 seconds

2004 trailblazer: diagram..clunk spring goes in the trans..bolt

Customer Question

2004 trailblazer 4l60E transmission. If you can give me a diagram and tell me where and how exactly the anti-clunk spring goes in the trans. Also if you can give me a diagram for bolt length and bolt location for the valve body. Thanks!
Submitted: 4 years ago.
Category: Chevy
Expert:  goodwrench9124 replied 4 years ago.

Hello and welcome. here is the valve body bolts and different length locations. what spring are you calling a clunk spring?

 

 

graphic

 

 

  • Check that all the valve body bolts are in the correct location.
  • Each bolt number refers to a specific bolt size, as indicated by the following list:

    1 -- M6 x 1.0 x 65.0
    2 -- M6 x 1.0 x 54.4
    3 -- M6 x 1.0 x 47.5
    4 -- M6 x 1.0 x 17.7
    5 -- M6 x 1.0 x 35.0

  • Tighten the bolts from the center of the valve body working your way out in a spiral pattern to the outside edge.
  • Tighten
    Tighten the bolts to 8-14N·m (6-10 lb ft).

    Customer: replied 4 years ago.
    lo/reverse clutch support retainer.....When do I put it in and somebody said it connects to something? maybe if you have a diagram for me, thanks!
    Expert:  goodwrench9124 replied 4 years ago.

    below is a picture of the inside, let me know if this is not what you need.

     

    graphic

    (600)3-4 Clutch Boost (5) Spring Assembly
    (601)Thrust Washer - Pump to Drum
    (602)2-4 Band Assembly
    (603)Reverse Input Clutch Bushing - Front
    (605)Reverse Input Clutch Housing and Drum Assembly
    (606)Reverse Input Clutch Bushing - Rear
    (607)Reverse Input Clutch Piston Assembly
    (608a)Reverse Input Clutch Seal - Inner
    (608b)Reverse Input Clutch Seal - Outer
    (609)Reverse Input Clutch Spring Assembly
    (610)Reverse Input Clutch Spring Retainer Ring
    (611)Reverse Input Clutch Plate - Belleville
    (612a)Reverse Input Clutch Turbulator Plate - Steel
    (612b)Reverse Input Clutch Plate Assembly - Fiber
    (613)Reverse Input Clutch Backing Plate - Selective
    (614)Reverse Input Clutch Retaining Ring
    (615)Stator Shaft/Selective Washer Bearing Assembly
    (616)Thrust Washer - Selective
    (617)Check Valve Retainer and Ball Assembly
    (618)O-Ring Seal - Location Model Dependent
    (619)Oil Seal Ring - Solid
    (620)Retainer and Checkball Assembly
    (621)Input Housing and Shaft Assembly - Model Dependent
    (622)O-Ring Input to Forward Clutch Housing Seal
    (623)3rd and 4th Clutch Piston
    (625)3rd and 4th Clutch Ring - Apply
    (626)3rd and 4th Clutch Spring Assembly
    (627)Forward Clutch Housing Retainer and Ball Assembly
    (628)Forward Clutch Housing
    (630)Forward Clutch Piston
    (632)Overrun Clutch Piston
    (633)Overrun Clutch Ball
    (634)Overrun Clutch Spring Assembly
    (635)Overrun Clutch Spring Retainer Snap Ring
    (636)Input Housing to Output Shaft Seal
    (637)Input Sun Gear Bearing Assembly
    (638)Overrun Clutch Hub Retaining Snap Ring
    (639)Overrun Clutch Hub
    (640)Forward Sprag Clutch Inner Race and Input Sun Gear Assembly
    (642)Forward Sprag Assembly
    (643)Sprag Assembly Retainer Ring
    (643)Sprag Assembly Retainer Ring
    (644)Forward Clutch Race - Outer
    (645a)Overrun Clutch Plate - Steel
    (645b)Overrun Clutch Plate Assembly - Fiber
    (646)Forward Clutch Plate - Apply
    (648)Forward Clutch Plate - Waved
    (649a)Forward Clutch Plate - Steel
    (649b)Forward Clutch Plate Assembly - Fiber
    (650)Forward Clutch Backing Plate - Selective
    (651)Forward Clutch Backing Plate Retainer Ring
    (653)3rd and 4th Clutch Apply Plate - Stepped
    (653)3rd and 4th Clutch Apply Plate - Stepped
    (653)3rd and 4th Clutch Apply Plate - Stepped
    (654a)3rd and 4th Clutch Plate Assembly - Fiber - Quantity Model Dependent 5, 6 or 7 Plates
    (654a)3rd and 4th Clutch Plate Assembly - Fiber - Quantity Model Dependent 5, 6 or 7 plates
    (654a)3rd and 4th Clutch Plate Assembly - Fiber - Quantity Model Dependent 5, 6 or 7 plates
    (654b)3rd and 4th Clutch Plate - Steel - Quantity Model Dependent
    (654b)3rd and 4th Clutch Plate - Steel - Quantity Model Dependent
    (654b)3rd and 4th Clutch Plate - Steel - Quantity Model Dependent
    (655)3rd and 4th Clutch Backing Plate - Selective - Model Dependent
    (655)3rd and 4th Clutch Backing Plate - Selective - Model Dependent
    (655)3rd and 4th Clutch Backing Plate - Selective - Model Dependent
    (656)3rd and 4th Clutch Backing Plate Retainer Ring
    (657)Input Sun Gear Front Bushing
    (659)Input Sun Gear Rear Bushing
    (688)Cup Plug
    (698)Orificed Cup Plug

     

     

    graphic

     

    (661)Output Shaft to Input Carrier Retainer
    (662)Input Carrier Assembly - 4 or 5 Pinion-Model Dependent
    (662)Input Carrier Assembly
    (663)Thrust Bearing Assembly - Input Carrier to Reaction Shaft
    (664)Input Internal Gear
    (665)Reaction Carrier Shaft Front Bushing
    (666)Reaction Carrier Shaft
    (667)Reaction Carrier Shaft Rear Bushing
    (668)Reaction Shaft/Internal Gear Retainer Ring
    (669a)Thrust Bearing Assembly - Reaction Shaft Shell
    (669b)Thrust Bearing Assembly - Reaction Shaft Shell - Some Models
    (670)Reaction Sun Shell
    (671)Reaction Sun Gear Retainer Ring
    (672)Reaction Sun Bushing
    (673)Reaction Sun Gear
    (674)Thrust Washer - Race/Reaction Shell
    (675)Low and Reverse Roller Clutch Race
    (676)Low and Reverse Support to Case Retainer Ring
    (677)Low and Reverse Roller Assembly Retainer Ring - Cam
    (677)Low and Reverse Roller Assembly Retainer Ring - Cam
    (678)Low and Reverse Roller Clutch Assembly
    (679)Low and Reverse Clutch Support Assembly
    (680)Low and Reverse Clutch Support Retainer Spring
    (681)Reaction Carrier Assembly - 4 or 5 Pinion-Model Dependent
    (681)Reaction Carrier Assembly - 4 or 5 Pinion-Model Dependent
    (682a)Low and Reverse Clutch Plat - Waved
    (682b)Spacer Low and Reverse Clutch Plate - Selective
    (682c)Low and Reverse Clutch Plate Assembly - Fiber
    (682d)Low and Reverse Clutch Turbulator Plate - Steel
    (683)Thrust Bearing Assembly - Reaction Carrier/Support
    (684)Internal Reaction Gear
    (685)Internal Reaction Gear Support
    (686)Reaction Gear/Support Retainer Ring
    (687)Output Shaft
    (690)Output Shaft Sleeve - Model Dependent 2WD only
    (691)Output Shaft Seal - Model Dependent 2WD only
    (692)Reaction Gear Support to Case Bearing
    (693)Low and Reverse Clutch Retainer Ring
    (694)Low and Reverse Clutch Spring Assembly
    (695)Low and Reverse Clutch Piston
    (696a)Low and Reverse Clutch Seal - Outer
    (696b)Low and Reverse Clutch Seal - Center
    (696c)Low and Reverse Clutch Seal - Inner
    (697)Oil Deflector - High Output Models Only
    (699)Internal Transmission Speed Sensor Rotor

     

    Customer: replied 4 years ago.
    do you have a picture for looking down into the trans that states where the lo/ reverse spring goes? picture of what lugs in the case, it connects too. That should be i, haks for all your help!
    Expert:  goodwrench9124 replied 4 years ago.

    this should be what you are looking for.

     

     

    graphic

     

     

     

    Install the low and reverse clutch support retainer spring (680) into the case.

     

     

     

     

     

    goodwrench9124, ASE Certified Technician
    Category: Chevy
    Satisfied Customers: 3431
    Experience: Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified
    goodwrench9124 and 10 other Chevy Specialists are ready to help you
    Customer: replied 4 years ago.
    Thank-you soooooo much for the infomation, be back again!
    Expert:  goodwrench9124 replied 4 years ago.

    you are very welcome!!!

     

    Thanks again for using JA!!!

    JustAnswer in the News:

     
     
     
    Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
    JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
    Web sites like justanswer.com/legal
    ...leave nothing to chance.
    Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
    Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
    I will tell you that...the things you have to go through to be an Expert are quite rigorous.
     
     
     

    What Customers are Saying:

     
     
     
    • I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money. Todd L Rochester NY
    < Last | Next >
    • I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money. Todd L Rochester NY
    • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C. Freshfield, Liverpool, UK
    • This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!! Alex Los Angeles, CA
    • Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult. GP Hesperia, CA
    • I couldn't be more satisfied! This is the site I will always come to when I need a second opinion. Justin Kernersville, NC
    • Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around. Esther Woodstock, NY
    • Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know. Robin Elkton, Maryland
     
     
     

    Meet The Experts:

     
     
     
    • Tim's Auto Repair

      mechanic

      Satisfied Customers:

      7641
      Have owned a repair shop for 25 yrs.
    < Last | Next >
    • http://ww2.justanswer.com/uploads/TI/tim37857/2011-10-28_23053_S6301814.64x64.JPG Tim's Auto Repair's Avatar

      Tim's Auto Repair

      mechanic

      Satisfied Customers:

      7641
      Have owned a repair shop for 25 yrs.
    • http://ww2.justanswer.com/uploads/DT/dt69nova/2012-6-15_234154_pic1.64x64.jpg Dave Nova's Avatar

      Dave Nova

      Chevrolet Technician

      Satisfied Customers:

      6870
      ASE Master Certification. GM World Class Certification
    • http://ww2.justanswer.com/uploads/ggrote1/2009-06-27_031011_me.jpg Gary's Avatar

      Gary

      Chevy Technician

      Satisfied Customers:

      5404
      15 years GM master tech
    • http://ww2.justanswer.com/uploads/testedtuff/2009-09-26_170108_pictures.jpg John's Avatar

      John

      Master A.S.E Automotive technician

      Satisfied Customers:

      4071
      A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician
    • http://ww2.justanswer.com/uploads/RO/rodcuda/2011-7-25_224114_Donhoff1.64x64.JPG Neal's Avatar

      Neal

      Chevy Mechanic

      Satisfied Customers:

      2306
      Shop Owner and Mechanic on multiple makes.
    • http://ww2.justanswer.com/uploads/goodwrench9124/2008-11-09_220838_dscf0007.jpg goodwrench9124's Avatar

      goodwrench9124

      ASE Certified Technician

      Satisfied Customers:

      2041
      Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified
    • http://ww2.justanswer.com/uploads/DR/drivefast1971/2012-1-12_172422_0009051tQKh.64x64.jpg Ron Z.'s Avatar

      Ron Z.

      - Chevy Tech -

      Satisfied Customers:

      1912
      18+yrs experience. State Inspector and Chevy Diagnostics
     
     
     
    Chat Now With A Chevy Mechanic
    goodwrench9124
    goodwrench9124
    Chevy Mechanic
    3431 Satisfied Customers
    Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified