How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 18697
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
18617752
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Need head torque specs for 2000 Momta Carlo, 3400 engine

Resolved Question:

Need head torque specs for 2000 Momta Carlo, 3400 engine
Submitted: 7 years ago.
Category: Chevy
Expert:  Ron Z. replied 7 years ago.

 

Tighten the NEW cylinder head bolts to 60 N.m (44 lb ft) in the order shown. Use the J 36660-A torque angle meter in order to rotate the cylinder head bolts an additional 95 degrees.

graphic

Ron Z. and 5 other Chevy Specialists are ready to help you