How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joel Your Own Question
Joel
Joel, Auto technician
Category: Chevy
Satisfied Customers: 1603
Experience:  GM, ASE Certified Technician. Chevy, Buick, Pontiac, Olds. Over 18 Years experience and growing.
5217488
Type Your Chevy Question Here...
Joel is online now
A new question is answered every 9 seconds

1998 CHEVY MALIBU 3100 V6 ENGINE -- NEED INTAKE PUSH ROD SEQUENCE

This answer was rated:

1998 CHEVY MALIBU 3100 V6 ENGINE -- NEED INTAKE PUSH ROD SEQUENCE FR BELT SIDE OF THE INGINE TO BREATHER SIDE -- BOTH EXHAUST AND INTAKE

THANKS

Hello and welcome.

Did you also need torque specs for rockers?

 

Customer: replied 7 years ago.
My book shows 10nm +30degrees My brothertrying to help removed rods when I left garage.

1- Exhaust rods are
longer and in this
position.

 

2- Intake rods are shorter
and in this position.

Same for other side.

Yes, that torque is correct.

 

graphic

Joel and 7 other Chevy Specialists are ready to help you