How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Chevy
Satisfied Customers: 29711
Experience:  20+ yrs. experience as repair shop manager and technician.
Type Your Chevy Question Here...
Eric is online now
A new question is answered every 9 seconds

S10: 2.2L..tricks for getting starter motor out..bracket..bell housing

Resolved Question:

94 2.2L S10- any tricks for getting starter motor out. Removed support bracket but still need 1/2 inch to clear the bell housing for removal
Submitted: 6 years ago.
Category: Chevy
Expert:  Eric replied 6 years ago.



You need the front tires hanging down so that you get added clearance.



After all the mounting bolts have been unfastened, slide the starter motor forward, tilt the rear end up and remove the starter motor. This may involve a little bit of twisting and turning but it will come out

Eric and other Chevy Specialists are ready to help you
Customer: replied 6 years ago.
Cool Thanks