How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jon1544 Your Own Question
Jon1544
Jon1544, ASE Certified Technician
Category: Chevy
Satisfied Customers: 29
Experience:  ASE Master Certified, 12 years Experience
24832142
Type Your Chevy Question Here...
Jon1544 is online now
A new question is answered every 9 seconds

how do you program a fob for a 2006 chevy hhr

Resolved Question:

how do you program a fob for a 2006 chevy hhr
Submitted: 7 years ago.
Category: Chevy
Expert:  Jon1544 replied 7 years ago.

You will need a scan tool to program the key fob. The dealer would be the best place to get this done.

 

Customer: replied 7 years ago.

is there any other way besides the dealer

 

Expert:  Jon1544 replied 7 years ago.

Here are the steps to reprogram it. You would still need access to a scan tool. I would call the shop to see if they would be able to perform the function. Never tried to program with different scan tools.

 

  • Install a scan tool.
  • Turn ON the ignition with the engine OFF.
  • With the scan tool, select Body and Accessories.
  • Select Keyless Entry.
  • Select Module Setup.
  • Select BCM.
  • Select Program Key Fobs.
  • Select Invalidate All.
  • Follow the scan tool on screen instructions.
  • Remove the scan tool.
  • Exit the vehicle. Operate all functions on transmitters to verify correct system operation.
  • Jon1544 and 4 other Chevy Specialists are ready to help you