How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Triston Your Own Question
Triston
Triston, MASTER ASE CERTIFIED
Category: Chevy
Satisfied Customers: 1608
Experience:  10 YRS. EXP. ASE CERTIFIED SPECIALIZE IN ALL ELECTRICAL AND A/C ALSO AND ENGINE PERFORMANCE
10186415
Type Your Chevy Question Here...
Triston is online now
A new question is answered every 9 seconds

OK - how do I adjust the parking brake on my 05 Silverado,

This answer was rated:

OK - how do I adjust the parking brake on my 05 Silverado, HD 2500 (4x4), diesel, allison tranny?

good luck. and please accept my answer. thanks T-MAN

 

If the park brake automatic adjuster has been disabled, the following two person procedure must be performed.

  1. Hold the park brake pedal in the FULL upward position.

  2. Object Number: 913328  Size: SH
    Click here for detailed picture of above image.
  3. Pull rearward on the front park brake cable until the tension is released from the scribe or nail (1) installed through the holes in the pedal assembly.
  4. Remove the scribe or screwdriver (1).
  5. Slowly release the park brake cable until it returns to its original position.
  6. Release the park brake pedal.
  7. Lower the vehicle.
  8. Apply and release the park brake pedal to ensure that there is no binding or sticking.
Triston and other Chevy Specialists are ready to help you