How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, mechanic
Category: Chevy
Satisfied Customers: 15570
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Chevy Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

How to remove the shifter knob on a corvette 1984?

Resolved Question:

how to remove the shifter knob on a corvette 1984?
Submitted: 7 years ago.
Category: Chevy
Expert:  Tim's Auto Repair replied 7 years ago.

hi

the knob should unscrew counter clock wise

thanks

please ACCEPT my answer so I can get credit for my work.i don't receive commission unless you do .it does not cost you more money.we will still be able to communicate.. Bonuses and positive feedback are appreciated!if you are not satisfied with my answer,please do not leave bad feed back,i will gladly opt out and let another expert handle the question.PLEASE ASK IF YOU NEED MORE HELP

1984-88 VEHICLES



Linkage

See Figure 1

  1. Disconnect the negative battery cable.
  2. Remove the left seat from the vehicle. If your vehicle is equipped with power seats, make sure to detach the electrical wiring.
  3. Remove the shift knob.
  4. Remove the console cover and the glove compartment lock.
  5. Remove the left side panel from the console.
  6. Remove the shifter cover.
  7. Loosen the shifter rod adjusting nuts.




Click image to see an enlarged view

Fig. Fig. 1: Shift linkage adjustment-1984-88 vehicles

  1. With the transmission and shifter in Neutral, install the alignment in the shifter, as shown in the accompanying figure.
  2. Equalize the swivels on all three shift levers. Hand tighten the forward and rear adjusting nuts at the same time with equal force. Do this for all three shifter rods, and then tighten the forward and rear adjusting nuts at the same time to specifications.
  3. After the adjustment is complete, install the components previously removed.


TV Cable

See Figure 2

To adjust the Throttle Valve (TV) cable, refer to the accompanying figure.



Click image to see an enlarged view

Fig. Fig. 2: TV cable adjustment procedure-1984-88 vehicles

Park Lock Cable

See Figure 3

To adjust the Park Lock cable, refer to the accompanying figure.



Click image to see an enlarged view

Fig. Fig. 3: Park lock cable adjustment-1984-88

Tim's Auto Repair and 7 other Chevy Specialists are ready to help you