How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 15564
Experience:  15 years GM master tech
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

1992 Chevrolet Truck: 1 ton P/U 4WD 7.4L tbi 8cyl belt routing diagram

Customer Question

1992 Chevrolet Truck K3500 1 ton P/U 4WD 7.4L TBI 8cyl belt routing diagram
Submitted: 7 years ago.
Category: Chevy
Expert:  Gary replied 7 years ago.
is this what you need?

Fig.XXXXXBelt Routing

  1. Using a 1/2 inch breaker bar with a 5/8 inch socket placed on tensioner pulley, rotate tensioner to release belt tension, then remove belt.
  2. Route belt over all pulleys except belt tensioner. Refer to Fig. 24, for correct serpentine drive routing.
  3. Rotate tensioner to released position and slide belt over tensioner pulley.
  4. Ensure belt has correct groove tracking around each pulley.



© 2009 ALLDATA LLC. All rights reserved.
Terms of Use
Gary and 4 other Chevy Specialists are ready to help you