How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vern Your Own Question
Vern
Vern, Shop Foreman
Category: Chevy
Satisfied Customers: 163
Experience:  33 years experience, 22 years GM Training / Experience. Certified Grand Master Technician
13385304
Type Your Chevy Question Here...
Vern is online now
A new question is answered every 9 seconds

clutch adjustment on a 1989 chevy v3500 4x4 with a 454 cid mill?

Customer Question

where is the clutch adjustment on a 1989 chevy v3500 4x4 with a 454 cid mill?
Submitted: 7 years ago.
Category: Chevy
Expert:  Vern replied 7 years ago.
Hello and welcome to JA. These vehicles were built with a hydraulic clutch system and unfortunenately are not adjustable.
Customer: replied 7 years ago.
so the only adjustment is a new disc? it doesn't slip. only not enough peddle when everything is hot
Expert:  Vern replied 7 years ago.
You can check the fluid level to make sure it is OK. Check for leaks at the clutch housing and under the front floor mat area where the clutch master cylinder rod goes through the firewall. If all that looks good then the clutch disc will need replacement. You will also need to check the clutch fork for wear at the pivot area as this can also cause a low pedal. While you have the clutch out you should also check the clutch pilot bearing.
Vern and 4 other Chevy Specialists are ready to help you
Customer: replied 7 years ago.
OK, thanks for your help Vern..
Expert:  Vern replied 7 years ago.
You are very welcome.