How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 17972
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
18617752
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

how to remove 1996 chevy blazer door panel

Resolved Question:

how to remove 1996 chevy blazer door panel
Submitted: 7 years ago.
Category: Chevy
Expert:  Ron Z. replied 7 years ago.
Remove or Disconnect

  1. Door handle bezel.
  2. Window regulator handle (if equipped).
  3. Power accessory switch mounting panel (it equipped with power accessories).
  4. Handle bezel screw.
    • Carefully pry off trim panel armrest screw cover with a flat blade tool to access screw.
  1. Trim panel from the door.
    • Pry the retainers from their seats using J 38778.

Install or Connect

graphic

  1. Trim panel to the door.
  2. Window regulator handle (if equipped).
  3. Power accessory switch mounting panel (if equipped with power accessories).
  4. Handle bezel screw. Tighten
    • Trim panel armrest screw to 5 N.m (44 lb. in.) .
  1. Door handle bezel.
Ron Z. and 2 other Chevy Specialists are ready to help you

Related Chevy Questions