How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ssnyder Your Own Question
ssnyder
ssnyder, ASE Certified Technician
Category: Chevy
Satisfied Customers: 34
Experience:  16 yrs service tech gm dealership
19598746
Type Your Chevy Question Here...
ssnyder is online now
A new question is answered every 9 seconds

1990 chevy truck: 4x4 3 quarter ton..master cylinder and bled it out

Resolved Question:

My clutch pedal went to the floor on my 1990 chevy truck 4x4 3 quarter ton 350 w/ 5 speed, so I replaced the slave cylinder and the master cylinder and bled it out. I can crack the bleader value and only fluid comes out, but I still have nothing on pedal... please help.
Submitted: 7 years ago.
Category: Chevy
Expert:  akcarguy replied 7 years ago.
are you positivbe the pushrod from the pedal to maser is fully seate and working properly?
Customer: replied 7 years ago.
it looks like it is but not shur will see if it is leaking thanks
Expert:  ssnyder replied 7 years ago.
Hey do you have access to a mighty vac? if you do use it on top of the slave fill cap and have a friend put both hands around it to punp the air out it works trust me
ssnyder, ASE Certified Technician
Category: Chevy
Satisfied Customers: 34
Experience: 16 yrs service tech gm dealership
ssnyder and other Chevy Specialists are ready to help you