How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt J Your Own Question
Matt J
Matt J, Chevy Technician
Category: Chevy
Satisfied Customers: 1399
Experience:  10+ years automotive tech, 5 years of experience in a GM dealer
14582819
Type Your Chevy Question Here...
Matt J is online now
A new question is answered every 9 seconds

How to remove rotors from a 2007 chevrolet colorado lt 5cyl

This answer was rated:

how to remove rotors from a 2007 chevrolet colorado lt 5cyl
FRT or rear 2 orXXXXX
Customer: replied 7 years ago.
It is 2 wheel rear drive, but the rotors are for the fron that we need to know how to remove & replace.

Hello my name is XXXXX XXXXX I will be more than happy to assist you.

 

Brake Rotor Replacement

Removal Procedure


    Object Number: 787456  Size: SH

  1. Inspect the brake fluid level in the brake master cylinder reservoir.
  2. If the brake fluid is midway between the maximum-full point and the minimum allowable level, no brake fluid needs to be removed from the reservoir before proceeding.
    Object Number: 787455  Size: SH

  3. If the brake fluid level is higher than midway between thew maximum-full point and the minimum allowable level, using an appropriate tool, remove the brake fluid to the midway point before proceeding.
    Object Number:(NNN) NNN-NNNN Size: SH

  4. Raise the vehicle.
  5. Remove the front brake caliper.

Object Number:(NNN) NNN-NNNN Size: SH

  1. Remove the brake caliper slide pin bolts.
    Object Number:(NNN) NNN-NNNN Size: SH

  2. Remove the brake caliper from the mounting bracket.
  3. Important: In the following service procedure, support the wheel hub/brake rotor assembly with wood when working on the bench.

  4. Using 2 pieces of wood, support the wheel hub/brake rotor assembly.
    Object Number:(NNN) NNN-NNNN Size: SH

  5. Remove the wheel hub/speed sensor to brake rotor bolts.
    Object Number:(NNN) NNN-NNNN Size: SH

  6. Separate the brake rotor from the wheel bearing/hub assembly.
  7. Clean the surface between the wheel bearing/hub assembly and the brake rotor.
Matt J, Chevy Technician
Category: Chevy
Satisfied Customers: 1399
Experience: 10+ years automotive tech, 5 years of experience in a GM dealer
Matt J and 6 other Chevy Specialists are ready to help you