ignition switch replacement for a 2004 chevy silverado 1500 4wd truck
This procedure requires a Special Tool, which may not be available from Parts Stores:
Here is Chevrolet procedure:
click below
REMOVE IGNITION SWITCH
I NEED TO KNOW IF I NEED TO REMOVE THE STEERING WHEEL AND AIR BAG TO PERFORM THIS JOB OR REMOVE THE COVER AROUND THE KEY SWITCH. IS SO, HOW DO I REMOVE THE COVER? THANKS
Please read & understand the procedure I posted.It says to remove the Steering Column Trim Covers.Some covers have 2 Torks screws in the bottom. (remove the screws)Some have no screws & you just need to unsnap the bottom half from the top.Then look near the Ignition Switch & see if there is a "male" torks screw retaining the top half. If there is remove the screw.If not unsnap the top
Experience: Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
THANK YOU FOR YOUR INFORMATION, GOOD SITE, HOPE TO USE IT AGAIN.
You are Welcome...........THANK YOUThanks for using J/A