How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 15181
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

1999 chevy s10 blazer: shift indicator lights..cluster..shifts fine

Customer Question

i have a 1999 chevy s10 blazer and the shift indicator lights up but it wont show what gear it is in replacer selector switch on side of trans did not fix it replaced cluster and did not fix it no codes storred and trans shifts fine just dont know what gear its in on the display
Submitted: 7 years ago.
Category: Chevy
Expert:  Carhelp4u replied 7 years ago.
Do you have access to a class 2 scan tool? Do you have any problems regarding the fuel or temp gauge also?
Customer: replied 7 years ago.
i am using a snapon solstis and I have no prob with temp gauge or fuel guage. Everything appears to be working except the block over the gear selector in the dash showing which gear you are in. THe indicator lights up and shows all the gears, but when shifting into any gear, selection is not highlighted.
Expert:  Carhelp4u replied 7 years ago.
Does this scan tool have the ability to watch the powertrain control module as you shift through the gears? If so does the scan acknowledge that the vehicle is being changed into other gears?