How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt J Your Own Question
Matt J
Matt J, Chevy Technician
Category: Chevy
Satisfied Customers: 1399
Experience:  10+ years automotive tech, 5 years of experience in a GM dealer
14582819
Type Your Chevy Question Here...
Matt J is online now
A new question is answered every 9 seconds

A 2007 silverado with service tire monitor system on info dash readout

Resolved Question:

I have a 2007 silverado with service tire monitor system on info dash readout how can i reset this so i can complete the relern tire sequence? thanks
Submitted: 7 years ago.
Category: Chevy
Expert:  Matt J replied 7 years ago.

Hello my name is XXXXX XXXXX I will be more then happy to assist you.

 

Alternate Keyless Entry Transmitter or DIC Learn Enable Method

  1. Ignition ON, initiate the TPM Learn Mode using one of the following procedures:
    On vehicles equipped with keyless entry, simultaneously press the keyless entry transmitters lock and unlock buttons until a double horn chirp sounds indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.
    On vehicles not equipped with keyless entry, press and release the driver information center (DIC) INFO button until the TIRE LEARN message appears on the DIC display. Press and hold the SET/RESET button until a double horn chirp sounds indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.
  2. Starting with the left front tire, learn the tire pressure.

    Caution: Over inflating tires may cause personal injury or damage to the tires and wheels. When increasing tire pressure do not exceed the maximum inflation pressure as noted on the tire sidewall.

    Increase/decrease the tire pressure for 8-10 seconds then wait for a horn chirp. The horn chirp may occur before or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached. Once the horn chirp has sounded, the sensor information is learned and the turn signal in the next location to be learned will illuminate.
  3. After the horn chirp has sounded and the right front turn signal is illuminated, repeat step 2 for the remaining 3 sensors in the following order:
    3.1. Right front
    3.2. Right rear
    3.3. Left rear
  4. When the left rear sensor has been learned and a double horn chirp has sounded, the learn process is complete and the RCDLR exits the learn mode.
  5. Ignition OFF, adjust all tires to the recommended pressures. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label
Matt J and 10 other Chevy Specialists are ready to help you
Customer: replied 7 years ago.
will relerning the tires get rid of the service tire monitor system on the dash?
Expert:  Matt J replied 7 years ago.
Doing the relaern will reset the system and turn the light off.