How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Moore Your Own Question
Michael Moore
Category: Chevy
Satisfied Customers: 2956
Experience:  ASE Master/GM WORLD CLASS/GM Master/GM ASEP/Dodge Gold/Mazda cert.
Type Your Chevy Question Here...
Michael Moore is online now
A new question is answered every 9 seconds

how do I remove oil pan on a 202 s-10 blazer 4.3 engine and

Customer Question

how do I remove oil pan on a 202 s-10 blazer 4.3 engine? and I would also like to know is it posible for distibuor gear to shatter if oil pump is not locked up?.
Submitted: 7 years ago.
Category: Chevy
Expert:  Michael Moore replied 7 years ago.
The oil pan can only beremoved by removing the engine from the truck, most shops charge about 10 hours of labor. Some techs can replace the gasket by lifing the engine off the mounts as far as it can go,remove the oil pans bolts and fish out the gasket. This is very heard work even on a lift, stil takes about 4 hours to do. I would not recommend this proceedure unless you are a experanced tech.

The gear at the end of the distributor has been known to wear out on the 4.3 liter engine. You can replace the gear, sometimes the camshaft gear gets damaged, but not offten.
Michael Moore and 4 other Chevy Specialists are ready to help you
Customer: replied 7 years ago.
Thank u God bless.
Expert:  Michael Moore replied 7 years ago.
Thanks for using just answer.

Related Chevy Questions