How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Jones Your Own Question
Daniel Jones
Daniel Jones,
Category: Chevy
Satisfied Customers: 498
Experience:  GM A Tech at Straub Buick GMC
15093763
Type Your Chevy Question Here...
Daniel Jones is online now
A new question is answered every 9 seconds

How to replace the camshaft position sensor on a 1999 Malibu

This answer was rated:

how to replace the camshaft position sensor on a 1999 Malibu
Hi Customer. Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:

-What type of engine is in your Chevy?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 7 years ago.
3.1L V6

Hi, Welcome to Just Answer. to replace the Camshaft sensor you may need to remove the power steering pump to gain access to the sensor. You need to unplug the connector , unbolt the sensor, and remove the Sensor, then install the new Sensor.

 

graphic

 

 

 

 

Daniel Jones and 2 other Chevy Specialists are ready to help you
Customer: replied 7 years ago.
I know i have to remove the power steering pump but I don't know where the bolts are for me to take it off.
The bolts are behind the pulley. there are 3 of them and you access the through the holes in the pulley. I will get you a picture.

Here is the image:

 

graphic

 

 

 

 

 

 

 

Related Chevy Questions