How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Jones Your Own Question
Daniel Jones
Daniel Jones,
Category: Chevy
Satisfied Customers: 498
Experience:  GM A Tech at Straub Buick GMC
15093763
Type Your Chevy Question Here...
Daniel Jones is online now
A new question is answered every 9 seconds

How to replace door glass in a Chevy S10?

In this position, the window regulator rollers should be accessible through the openings in the door panel. Remove the window run channels. Remove the window weather-strip. Remove the door outer weather-strip. Perform the following steps in order to remove the window from the regulator: Move the window forward in order to release the sash channel from the rear regulator roller. Carefully tilt the window forward to a vertical position. Pull the window upward in order to release the sash channel from the front regulator roller. Carefully rotate the glass vertically. Remove the window from the door.

Read full interaction below »

Resolved Question:

How to replace door glass in Chevy S10 driver’s side?

Submitted: 8 years ago.
Category: Chevy
Expert:  Daniel Jones replied 8 years ago.

By the way, it would help us to know:
-What year is your Chevy?
-Is it a 2 or 4 door?

-Is it the driver’s door?

-Manual or Power windows?

Customer: replied 8 years ago.

Hello-

It is a 98

2 door

drivers side

manual

thanks!

Expert:  Daniel Jones replied 8 years ago.
Remove the door panel. Lower the window about one half of the way down.

In this position, the window regulator rollers should be accessible through the openings in the door panel. Remove the window run channels. Remove the window weather-strip. Remove the door outer weather-strip. Perform the following steps in order to remove the window from the regulator: Move the window forward in order to release the sash channel from the rear regulator roller. Carefully tilt the window forward to a vertical position. Pull the window upward in order to release the sash channel from the front regulator roller. Carefully rotate the glass vertically. Remove the window from the door.

Daniel Jones and 5 other Chevy Specialists are ready to help you