How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29450
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

How do you remove the right door panel on a 2007 gmc sierra

This answer was rated:

How do you remove the right door panel on a 2007 gmc sierra slt pickup with all door options?
Welcome Don. New body style or the sierra classic?
Customer: replied 8 years ago.
It is the new body style, I need to remove the panel so I can replace the mirror, trk has leather, vinyl interior.

One last question, I do so many that I can't remember which model has the pull handle infront of the switch. Does your have that pull handle that goes over the switch?

Customer: replied 8 years ago.
No!

Ok, thanks for clearing that up.

Object Number:(NNN) NNN-NNNN Size: MF
Click here for detailed picture of above image.

Callout

Component Name

1

Front Side Door Upper Trim Panel Assembly

2

Front Side Door Upper Trim Panel Clip (Qty: 3)

 


Front Side Door Trim Panel Replacement (SLT, A95)
Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

1

Front Side Door Locking Rod Knob Assembly

Tip

  1. Lower the window.
  2. Ensure the locking rod is in the unlocked position.
  3. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  4. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  5. Push the detent tab in to lock the knob to the locking rod.

2

Front Side Door Trim Panel Cover

3

Front Side Door Trim Panel Cover Retainer (Qty: 3)

4

Front Side Door Inside Handle Bezel Cover

5

Front Side Door Trim Panel Bolt (Qty: 3)

9 N·m (18 lb in)

6

Front Side Door Trim Panel Assembly

Tip

  1. Disconnect the electrical connectors.
  2. There are 2 hooks located on the lower portion of the door trim panel that are being used for manufacturing installation ONLY.
  3. If these hooks are damaged during either removal or installation of the door trim panel, replacement of the panel is not required.
  4. When installing the trim panel start at the lock knob, pushing down and outward moving toward the upper front.

7

Front Side Door Cable Retainer

Tip

  1. Depress both tabs to remove cable and pull cable rearward out of handle assembly.
  2. When reinstalling cable make sure that it is fully seated past the guide tab.

8

Front Side Door Trim Panel Retainer (Qty: 12)

GM Tech (Cam) and 9 other Chevy Specialists are ready to help you
Please fell free to reply if you need more information. Thanks for accepting.