How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29428
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

How do I disable the anti theft system on my 2001 Malibu

Customer Question

How do I disable the anti theft system on my 2001 Malibu
Submitted: 8 years ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 8 years ago.
WelcomeCustomer if you want to permanently disable the system, get a 2,200 ohm, 2.2k ohm resistor and cut the yellow and black small wire at the ignition switch passlock sensor. The solder this resistor in the body side of the wires and perform THIS procedure.
Customer: replied 8 years ago.

This sounds like a reasonable solution. What exactly do you mean by the "body side" of the wires?

 

Customer/p>
Expert:  GM Tech (Cam) replied 8 years ago.

The wires run from the ignition switch to the body control module. You are eliminating the ignition switch sensor, so you need to put the resistor tot he wires that go to the body.

GM Tech (Cam) and other Chevy Specialists are ready to help you
Customer: replied 8 years ago.

sounds good. So this is all done under the dashboard and not under the hood, correct?

 

 

Expert:  GM Tech (Cam) replied 8 years ago.
Correct. You can do all this in the car. I would go closer to the ignition cylinder.
Customer: replied 8 years ago.

Awesome thanks a lot.

 

Mailbu Dan