How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Chevrolet tecnician
Category: Chevy
Satisfied Customers: 511
Experience:  Over 25 years experience,GM grand master for 8 years,certified smog and government safety inspector
12771247
Type Your Chevy Question Here...
Billy is online now
A new question is answered every 9 seconds

how do i remove a premium model dash on a 2008 chevy silverado

Resolved Question:

how do i remove a premium model dash on a 2008 chevy silverado for radio removal
Submitted: 8 years ago.
Category: Chevy
Expert:  Billy replied 8 years ago.
hello and welcome to just answer.

can you please tell me if you have a RPO code SLT?

best regards
Billy
Customer: replied 8 years ago.
LTZ 08 silverado with premium dash and bose system ,need to know how to remove wood grain dash panel in front of radio
Expert:  Billy replied 8 years ago.
ok...I neded to know it it had and RPO SLT or not, however I will send you the procedure for both systems.
first is without RPO code SLT.

Instrument Panel Cluster Trim Plate Cover Replacement (without RPO SLT)

Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

1

Instrument Panel Cluster Trim Plate Cover Screw (Qty: 2)


Tighten
2 N·m (18 lb in)

2

Instrument Panel Cluster Trim Plate Cover Assembly

3

Retainer Clip (Qty: 4)

Expert:  Billy replied 8 years ago.
Instrument Panel Accessory Trim Plate Replacement (without RPO SLT)

Object Number:(NNN) NNN-NNNN Size: MF
Click here for detailed picture of above image.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel cluster trim plate cover. Refer to Instrument Panel Cluster Trim Plate Cover Replacement .

1

Instrument Panel Accessory Trim Plate Assembly

Procedure

  1. Disconnect the electrical connectors.
  2. When replacing the accessory trim plate, transfer all necessary components.

2

Retainer Clips (Qty: 14)

Expert:  Billy replied 8 years ago.
Radio Replacement (without RPO SLT)

Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedure

Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .

1

Radio Screw (Qty: 4)


Tighten
2 N·m (18 lb in)

2

Radio Assembly

Tip

Disconnect the electrical connector.
Disconnect the antenna cable.
Reprogram the radio after replacement.
Expert:  Billy replied 8 years ago.
this one is with the RPO SLT

Instrument Panel Accessory Trim Plate Replacement (with RPO SLT)

Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

1

Instrument Panel Accessory Trim Plate

Tip
Use a flat-bladed plastic trim tool in order to release the retainer clips securing the trim plate to the instrument panel.

2

Retainer Clips (Qty: 9)

Billy and other Chevy Specialists are ready to help you