How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ZZDaryl Your Own Question
ZZDaryl, Chevy Technician
Category: Chevy
Satisfied Customers: 12547
Experience:  28 year experience, Master Mechanic
Type Your Chevy Question Here...
ZZDaryl is online now
A new question is answered every 9 seconds

How do you replace the 4wd actuator

Resolved Question:

How do you replace the 4wd actuator?
Submitted: 8 years ago.
Category: Chevy
Expert:  ZZDaryl replied 8 years ago.
HiCustomer Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:
-What year is your Chevy?
-What model is your Chevy?
-What type of engine is in your Chevy?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 8 years ago.
2005 Chevy Silverado K1500 Z71 Crew Cab, V8, 5.3 L.
Expert:  ZZDaryl replied 8 years ago.
Removal Procedure
1. Raise the vehicle.
2. Remove the front differential carrier shield, if equipped.
3. Disconnect the electrical connector from the actuator.
4. Remove the electric motor actuator by turning the actuator counterclockwise.
Installation Procedure
1. Apply sealant to the threads of the electric motor actuator. Use the correct sealant.
2. Install the electric motor actuator.
Tighten: Tighten the actuator to 20 N.m (15 lb if).
3. Connect the electrical connector to the actuator.
4. Install the front differential carrier shield, if equipped.
5. Lower the vehicle.
ZZDaryl and 5 other Chevy Specialists are ready to help you

Related Chevy Questions