How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask frank Your Own Question
frank, Chevrolet Technician
Category: Chevy
Satisfied Customers: 3420
Experience:  33 years experience,24 years of Chevroler/GM experience and training .ASE Recertified Master Tech,
Type Your Chevy Question Here...
frank is online now
A new question is answered every 9 seconds

replace rear axle seals 95 suburban 1500 4wd

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  frank replied 8 years ago.
You need to remove the rear diferential cover-then remove the 5/16 headed lock bolt-slide the cross shaft out-push the avles in and get the c clips to come out then remove the axles to replace the seals.
Customer: replied 8 years ago.
Is the bearing pressed on the axle on these? CAn you shoot me a pic of the lock bolt?
Expert:  frank replied 8 years ago.
The bearing is pressed into the housing-the axle just slides out and no pic-when you pull the cover off you will see the head of the lock bolt on the drivers side of the case,you may have to rotate the ring gear and case 180 degrees to see it
frank and 5 other Chevy Specialists are ready to help you

Related Chevy Questions