How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29395
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

how to program a key for 2006 chevy uplander

Customer Question

how to program a key for 2006 chevy uplander
Submitted: 8 years ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 8 years ago.

WelcomeCustomer Here are the instructions for adding keys. If you are in Canada, you will need different instructions, so please ask if that is the case.

Adding Keys (Domestic)


To initiate, this procedures requires that a learned master key be available.

A total of 10 master keys or valet keys may be programmed to a single vehicle.

This procedure adds keys only. The procedure does not erase previously learned keys.

The keys to be learned must duplicate the mechanical cut of the current key.

If more than one valet key is to be learned, immediately precede each valet key with a learned master key.


  1. With a previously learned master key, turn ON the ignition, with the engine OFF.

  2. Turn OFF the ignition and remove the key.

  3. Within 10 seconds insert the key to be learned. Turn ON the ignition with the engine OFF. The vehicle has now learned the new key.