How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mauricio Your Own Question
mauricio
mauricio, Auto Service Technician
Category: Chevy
Satisfied Customers: 845
Experience:  8 years working for GM dealer in Delaware
12133139
Type Your Chevy Question Here...
mauricio is online now
A new question is answered every 9 seconds

10 pickup: a broken motor mount on a 1991 chevy..l

Resolved Question:

how do i replace a broken motor mount on a 1991 chevy s-10 pickup with a 2.5 l engine?
Submitted: 8 years ago.
Category: Chevy
Expert:  mauricio replied 8 years ago.
Notes

Fig. 1 Engine Mount Installation


FRONT

  1. Disconnect battery ground cable, then raise and support vehicle.
  2. Remove mount center bolt(s), then raise and support engine to take weight off mount.
  3. Remove mount retaining nuts from underside of crossmember, then remove mount, bolts and spacers, Fig. 1.
  4. Reverse procedure to install.

REAR

  1. Raise and support vehicle.
  2. Remove nut(s) securing mount to crossmember, Fig. 1, then raise and support rear of transmission to take weight off mount.
  3. Remove bolts securing mount to transmission tail housing, then the mount.
  4. Reverse procedure to install, ensuring converter bracket, if equipped, is properly positioned
mauricio and 3 other Chevy Specialists are ready to help you