How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott K Your Own Question
Scott K
Scott K, ASE Master Tech/Instructor
Category: Chevy
Satisfied Customers: 1569
Experience:  20 yrs Experience; GM factory Training ASE Master Certified with L1 advanced engine diagnostics
9480930
Type Your Chevy Question Here...
Scott K is online now
A new question is answered every 9 seconds

What are the torque specs and sequence for a Chevy S10, 2.2L

Customer Question

What are the torque specs and sequence for a Chevy S10, 2.2L cylinder head?
Submitted: 8 years ago.
Category: Chevy
Expert:  Scott K replied 8 years ago.

Hello and welcome to Just answer,

 

Below is the information you requested

 

Object Number: 2483  Size: SH

Use the following sequence in order to tighten the cylinder head bolts:

Tighten

Tighten the long cylinder head bolts to 63 N·m (46 lb ft).
Tighten the short cylinder head bolts to 58 N·m (43 lb ft).
6.1. Tighten bolt 1 to 63 N·m (46 lb ft).
6.2. Tighten bolt 2 to 58 N·m (43 lb ft).
6.3. Tighten bolt 3 to 58 N·m (43 lb ft).
6.4. Tighten bolt 4 to 63 N·m (46 lb ft).
6.5. Tighten bolt 5 to 63 N·m (46 lb ft).
6.6. Tighten bolt 6 to 58 N·m (43 lb ft).
6.7. Tighten bolt 7 to 58 N·m (43 lb ft).
6.8. Tighten bolt 8 to 63 N·m (46 lb ft).
6.9. Tighten bolt 9 to 63 N·m (46 lb ft).
6.10. Tighten bolt 10 to 58 N·m (43 lb ft).
6.11. Use a torque angle meter to tighten all the cylinder head bolts an additional 90 degrees in sequence.

 

Let me know if you have more questions

Scott K

Customer: replied 8 years ago.

I just found it on the internet. http://www.autozone.com/shopping/repairGuide.htm?pageId=0900cXXXXXXXXXfc

 

Sorry, thanks for your help.

Expert:  Scott K replied 8 years ago.

No problem let me know if you need further help.

 

Scott