How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Triston Your Own Question
Triston
Triston, MASTER ASE CERTIFIED
Category: Chevy
Satisfied Customers: 1610
Experience:  10 YRS. EXP. ASE CERTIFIED SPECIALIZE IN ALL ELECTRICAL AND A/C ALSO AND ENGINE PERFORMANCE
10186415
Type Your Chevy Question Here...
Triston is online now
A new question is answered every 9 seconds

Chevy S-10 year 2003, The ABS warning light stay on. How to fix it?

This answer was rated:

Chevy S-10 year 2003, The ABS warning light stay on. How to fix it?

to be more accurate i would need the abs code but the most common problem is the a wheel speed sensor goes bad and to test use a ohm meter and you should show between 700 and 10,000 ohms, if not replace the speed sensor. good luck. i hope i helped and please accept my answer. thanks T-MAN

Object Number: 388950  Size: SH
Click here for detailed picture of above imageidth=

  • Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information
  • Remove tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  • Remove brake caliper. Refer to Front Brake Caliper Replacement in Disc Brakes.
  • Remove the hub and rotor. Refer to Front Brake Rotor Replacement in Disc Brakes.
  • Remove wheel speed sensor mounting clip on the control arm.
  • Remove wheel speed sensor mounting clip on the frame rail.
  • Disconnect the wheel speed sensor electrical connector (2).
  • Remove the sensor mounting screw (5).
  • Triston and 6 other Chevy Specialists are ready to help you
    Customer: replied 8 years ago.
    Thank you very much.
    Your advised are very helpful.