How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Auto Technician
Category: Chevy
Satisfied Customers: 3490
Experience:  GM Mark of Excellence/ Service Guild Participant with 13 years experience, ASE Master Certified
4976144
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

how do you remove the emblem from a chevrolet silverado grill

Customer Question

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  Dan replied 8 years ago.
Radiator Air Upper Baffle and Deflector Replacement

Removal Procedure


    Object Number: 371535  Size: SH

  1. Remove the radiator air upper baffle retainers (Qty 8).
  2. Remove the radiator air upper baffle.

Installation Procedure


    Object Number: 371535  Size: SH

  1. Install the radiator air upper baffle.
  2. Install the radiator air upper baffle retainers (Qty 8).
  3. Radiator Grille Replacement (Chevrolet)
    Object Number:(NNN) NNN-NNNN Size: MF

    Callout

    Component Name

    Preliminary Procedure

    Remove the radiator air upper baffle/deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .

    1

    Radiator Grille Bolts (Qty: 4)

    Notice: Refer to Fastener Notice in the Preface section.

    Tighten
    7 N·m (62 lb in)

    2

    Radiator Grille

    Procedure

    1. Disengage the six clips by using a pair of flat-bladed pliers pinching the retainer tabs securing the grille to the hood stop and hood bumper brackets.
    2. Separate the radiator grille from the hood stop and hood bumper brackets by pushing the radiator grille outward away from the vehicle.
Customer: replied 8 years ago.
this is not what i asked.... all i want to do is remove the emblem from the grill
Expert:  Dan replied 8 years ago.

Here is what it shows for GMC but says Chevy is similar. Sorry not more specific but GM not very clear when it comes to Chevy for some reason.

Radiator Grille Emblem/Nameplate Replacement (GMC)
Object Number:(NNN) NNN-NNNN Size: SF

Callout

Component Name

1

Emblem Assembly (GMC)

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Tip

  1. The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
  2. Use a J 25070 Heat Gun or equivalent to remove the old nameplate. Clean all adhesive from grille and wipe the surface dry with a clean lint-free towel prior to installing the new name plate.
  3. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  4. Using the palm of the hand, wet out the emblem to the grille and ensure full adhesion of the emblem is made.