No Comment Added
Chevrolet impala 3.4
Hello and thank you for using just answer. This is a simplified repair on this car and it bolts in/out. Simply disconnect the wheel speed sensor connector at the hub, remove the brake caliper and rotor from the hub, remove front drive axle retainer nut and push the drive axle out of the wheel hub. The illustration below shows how the front hub is retained, I show that the retainer bolts for the front hub are NOT reusable so be sure you have new hardware, torgque spec. is 96 ft. lbs. when reinstalling the hub retainer bolts.
4 years Gm experience, ASE Certified and GM owner/enthusiest
HOW CAN I GET MORE INFORMATION ON THE DISASSEMBLY AND REASSEMBLY OF THE WHEEL HUB.
What other information do you need?