How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott K Your Own Question
Scott K
Scott K, ASE Master Tech/Instructor
Category: Chevy
Satisfied Customers: 1569
Experience:  20 yrs Experience; GM factory Training ASE Master Certified with L1 advanced engine diagnostics
9480930
Type Your Chevy Question Here...
Scott K is online now
A new question is answered every 9 seconds

2001 suburban: I remove the windshield washer assy, pump and reservoir

Resolved Question:

2001 suburban. How do I remove the windshield washer assy, pump and reservoir?
Submitted: 8 years ago.
Category: Chevy
Expert:  Scott K replied 8 years ago.

Hello Pete,

Welcome to Just answer,

  1. Remove the battery
  2. Remove the battery tray.
  3. Object Number: 662962  Size: SH
  4. Remove the wheelhouse panel on drivers side.
  5. Object Number: 401885  Size: SH
  6. Disconnect the electrical connector from the washer pump.
  7. Disconnect the electrical connector from the washer solvent level sensor.
  8. Disconnect the washer hose from the washer pump.
  9. Remove the upper bolt from the washer solvent container.
  10. Object Number: 346934  Size: SH

  11. Object Number: 346938  Size: SH

  12. Remove the lower bolts from the washer solvent container.
  13. Remove the washer solvent container from the vehicle.
Scott K and 6 other Chevy Specialists are ready to help you