How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Carhelp4u Your Own Question
Category: Chevy
Satisfied Customers: 5203
Type Your Chevy Question Here...
Carhelp4u is online now
A new question is answered every 9 seconds

How do I replace the exterior door handle on a 1998 Chevy Truck

Resolved Question:

No Comment Added
Submitted: 9 years ago.
Category: Chevy
Expert:  Carhelp4u replied 9 years ago.

Here is what you are going to have to do to gain access to the handle. Feel free to contact me with any questions. I omitted the door panel info as it sounds as though you already have it off.

  • Disconnect the negative battery cable.
  • Lower the window.
  • Remove the trim panel.
  • Remove the water deflector.
  • Carefully pry out the retainer clips in order to remove the speaker, as necessary.
    Object Number: 277746  Size: SH

  • Remove the inner panel bolts.
    Object Number: 277772  Size: SH

  • Remove the lock rods from the following components:
    The lock handle
    The lock lever
    The lock rod guides
  • Disconnect the wiring harness.
  • Slide the inner mounting panel rearward in order to release the regulator roller from the window sash.

    Remove the inner mounting panel.Object Number: 277774  Size: SH

  • Remove the outside handle rod from the rod clip.
    Object Number: 277776  Size: SH

  • Remove the lock cylinder rod from the rod clip.
  • Remove the outside handle mounting screws.
  • Remove the door lock cylinder from the outside handle housing.
  • Remove the handle.
  • Carhelp4u and 7 other Chevy Specialists are ready to help you
    Customer: replied 9 years ago.
    Thanks a lot!