How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob
Bob, Auto Tech
Category: Chevy
Satisfied Customers: 4087
Experience:  Plus 40 years GM, over 30 certified with Chevrolet, ASE certified Master Tech. (Expired, Retired)
2210118
Type Your Chevy Question Here...
Bob is online now
A new question is answered every 9 seconds

No Comment Added

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  Bob replied 8 years ago.
Are you looking for ignition timing or camshaft gear & belt timing?
Customer: replied 8 years ago.
camshaft gear to crank alignment
Expert:  Bob replied 8 years ago.
If you will look the cam gear you will see a small round hole in it close to the edge. Then look at the cover behind the gear and you will see a hole in it. Align the two holes and stick a drill bit or something through both holes to keep the cam gear from turning. Then turn the crank pulley to align the timing mark with the ZERO on the timing cover and align the distributor rotor with the number one plug wire terminal in the distributor cap and your good to go. Illustration below. Thanksgraphic
Bob and 2 other Chevy Specialists are ready to help you

Related Chevy Questions