How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roadsidejerry Your Own Question
roadsidejerry
roadsidejerry, auto mechanic
Category: Chevy
Satisfied Customers: 2948
Experience:  Auto Mechanic 39 years, 30 with NYPD Fleet Service Division
1699649
Type Your Chevy Question Here...
roadsidejerry is online now
A new question is answered every 9 seconds

how to set the bASE TIMING ON A 1986 CHEVY S10

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  roadsidejerry replied 8 years ago.
Hello Chuck,pick up or Blazer, 4 or 6 cylinder.
Customer: replied 8 years ago.
4 CYL PICK UP 2.5L
Expert:  roadsidejerry replied 8 years ago.

Hello Chuck,here is the timing information for your truck,you have to use the jumper on the diagnostic connector to set,then clear the code that will be set after you are done. The diagnostic connector is under the left side of the dash.

graphicgraphicgraphic

roadsidejerry and 3 other Chevy Specialists are ready to help you