How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Auto Technician
Category: Chevy
Satisfied Customers: 3490
Experience:  GM Mark of Excellence/ Service Guild Participant with 13 years experience, ASE Master Certified
4976144
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

how to remove 2006/2007 impala driver side power mirror

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  Dan replied 8 years ago.

Upper Extension Trim Panel Replacement


Object Number:(NNN) NNN-NNNN Size: MF
Click here for detailed picture of above imageidth=

Callout

Component Name

1

Front Side Door Upper Trim Panel Clip (Qty: 2)

2

Front Side Door Upper Trim Panel Assembly

Tip

  1. Pull on the top end of extension panel to disengage attaching clips.
  2. Lift extension panel out from behind the door trim panel.

Power Mirror Replacement


Object Number:(NNN) NNN-NNNN Size: SF
Click here for detailed picture of above imageidth=

Callout

Component Name

Preliminary Procedure

Remove the interior trim panel. Refer to Upper Extension Trim Panel Replacement .

1

Outside Rearview Mirror Nut (Qty: 3)

Notice: Refer to Fastener Notice in Cautions and Notices.

Tip
Disconnect the mirror electrical connector.

Tighten
10 N·m (89 lb in)

2

Outside Rearview Mirror Assembly


Dan and 5 other Chevy Specialists are ready to help you
Customer: replied 8 years ago.
I already remove the upper extension trim panel, but the problem I have is that I could not reach the electrical connector with the upper extension trim panel removed.
Expert:  Dan replied 8 years ago.

Front Side Door Trim Panel Replacement (Impala)


Object Number:(NNN) NNN-NNNN Size: LF
Click here for detailed picture of above imageidth=

Callout

Component Name

Preliminary Procedure

Remove front side door upper trim panel. Refer to Upper Extension Trim Panel Replacement .

1

Front Side Door Inside Handle Bezel Cover

2

Front Side Door Inside Handle Bezel Screw

Notice: Refer to Fastener Notice in Cautions and Notices.

Tighten
2 N·m (18 lb in)

3

Armrest Finish Cover

4

Front Side Door Pull Handle Screw

Tighten
2 N·m (18 lb in)

5

Front Side Door Trim Panel Reflector

6

Front Side Door Trim Panel Screw

Tighten
2 N·m (18 lb in)

7

Front Side Door Trim Assembly

8

Side Door Trim Retainer