How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joel Your Own Question
Joel, Auto technician
Category: Chevy
Satisfied Customers: 1603
Experience:  GM, ASE Certified Technician. Chevy, Buick, Pontiac, Olds. Over 18 Years experience and growing.
Type Your Chevy Question Here...
Joel is online now
A new question is answered every 9 seconds

i have a 2002 gmc envoy with a code p0014 camshaft ...

Customer Reply

Customer: replied 8 years ago.
i have a 2002 gmc envoy with a code p0014 camshaft position actuator b bank 1 timining over adv    changed lifters changed cam senser how can i fix this?   thank you brian
Expert:  Joel replied 8 years ago.
Hello and welcome. Are there any other codes? Just to be clear, were these parts replaced to try to correct this code, or did the code show up after lifter replacement? There are several things that can cause this code, and any more info may help.
Customer: replied 8 years ago.
Reply to Joel's Post: had a 1345 code fixed it cleard all codes ran fine for about 30 min started missing at idle and check engine light came on code was p0014 all the codes have been after lifter replacement
Expert:  Joel replied 8 years ago.
There is a pcm re-flash to adress this code, and a crank posrition variance re-learn procedure may need to be done,depending on what was done to fix the p1345 but since it came up after these repairs, it sounds like the exausth cam or actuator is out of time, debre in the actuator solenoid, This may be because of the previuous repairs, and the timing may be off, the actuator is damaged, or debre in the actuator.

Related Chevy Questions