How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask goodwrench9124 Your Own Question
goodwrench9124, ASE Certified Technician
Category: Chevy
Satisfied Customers: 3432
Experience:  Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified
Type Your Chevy Question Here...
goodwrench9124 is online now
A new question is answered every 9 seconds

No Comment Added

Customer Question

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  goodwrench9124 replied 8 years ago.

Hello and thanks for using JA!! if this info was helpfull to you please accept my answer.

here is the instructions for the starter on your vehicle.

Starter Motor Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Remove the air inlet duct to the throttle body.
    Object Number: 97628  Size: SH

  3. Remove the top starter bolt.
  4. Raise and suitably support the vehicle.
  5. Remove the lower starter bolt.
  6. Position the engine wiring harness aside.
  7. Position the starter for access to solenoid wiring.
  8. Remove the electrical wiring.
  9. Remove the starter.

Related Chevy Questions