How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JHoop Your Own Question
JHoop
JHoop, Chevy Technician
Category: Chevy
Satisfied Customers: 5446
Experience:  14 Year Engine Builder,16 years as a Tech HvyLine, Suspension, Electrical, Brakes, 6 Year Shop Owner
4700517
Type Your Chevy Question Here...
JHoop is online now
A new question is answered every 9 seconds

2003 Chevy Malibu: the torque spces and sequence for the head bolts

This answer was rated:

What are the torque spces and sequence for the head bolts in a 2003 Chevy Malibu 3.1?
HelloCustomer my name isXXXXX you for choosing justanswer.com.

Front Head:
graphic
-Tighten the cylinder head bolts to 60 Nm (44 ft. lbs.) in the sequence shown.
-Use the J 36660-A in order to tighten the bolts an additional 95 degrees.

Rear Head:
graphic
-Tighten the bolts to 60 Nm (44 ft. lbs.) in the sequence shown.
-Use the J36660-A in order to tighten the bolts an additional 95 degrees.

I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JHoop
___________________________
Don't forget to click ACCEPT. Bonuses as well as Feedback are always welcome. Thanks.

JHoop and 6 other Chevy Specialists are ready to help you
graphic
graphic
Take these too just in case....Thanks for the accept. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JHoop