How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark Bisig Your Own Question
Mark Bisig
Mark Bisig, Auto Service Technician
Category: Chevy
Satisfied Customers: 158
Experience:  28 years at a Chevrolet Dealer, ASE Master Technician, GM Master Technician
Type Your Chevy Question Here...
Mark Bisig is online now
A new question is answered every 9 seconds

No Comment Added

Customer Question

No Comment Added
Submitted: 8 years ago.
Category: Chevy
Expert:  Mark Bisig replied 8 years ago.

HelloCustomer could you tell what engine you have .....4 or 6 cylinder.

This will help me answer your question

Customer: replied 8 years ago.
Reply to Mark Bisig's Post: 6
Customer: replied 8 years ago.
6 cylinder
Expert:  Mark Bisig replied 8 years ago.

OK, There is a belt tensioner on the engine that has a large spring inside to keep the belt tight. To remove the belt you put a 3/8 drive ratchet in the square hole in the belt tensioner and pull the tensioner to loosen the tension on the belt. Here is a picture that might help you.

    Object Number: 192684  Size: SH

    You will see the square hole at the bottom end, not where it bolts on.

Related Chevy Questions