what is the push rod confirguration for a 94 chevy lumina 3.1 intake and exhaust?
intakes are the short pushrods, exhaust are the long ones
Reply to Sam C.'s Post: i know the push rod lenghts, what I want to know is the correct push rod configuration on this engine, 3.1 intake and exhaust. it's not the normal long on the exhaust, short on the intake pattern, this 3.1 follows a different push rod configuration, this is what I want the answer to.
Do you still need that info?
Reply to Virtual Wrench's Post: i am still waiting for an answer to my question about the push rod confirguration for the 3.1 engine. The answer I need is not what long or short push rods are, I understand this, On the intake and the exhaust, the push rods on a 3.1 folllow a diffrent pattern of long short long on the intake and the exhaust, I need this pushrod configuration.
Here is a pic that you can use to correctly install them, as you can see the longer ones show different than the shorter ones.
If you have further questions on this, please feel free to reply.
If not please click accept
Thanks for asking!
This is a little more info.FRONT TO REAR COWL SIDE E-I-E-I-I-E RADIATOR SIDE E-I-I-E-I-E
Please Accept Virtual Wrench Answer if this helped
Did you have any further questions?
If not please click the accept button to close the question.
35 years Master Mechanic
Reply to Virtual Wrench's Post: thank you virtual wrench I accept your answer and thank you, XXXXX XXXXX the answer that I was looking for and very pleased with your answer.