How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob
Bob, Auto Tech
Category: Chevy
Satisfied Customers: 4087
Experience:  Plus 40 years GM, over 30 certified with Chevrolet, ASE certified Master Tech. (Expired, Retired)
2210118
Type Your Chevy Question Here...
Bob is online now
A new question is answered every 9 seconds

How do i replace the water pump on a 2000 chevy venture

Customer Question

how do i replace the water pump on a 2000 chevy venture
Submitted: 9 years ago.
Category: Chevy
Expert:  Bob replied 9 years ago.

HiCustomer The pump is right in the center of the front of the motor. i am sending removal instructions for you to view. If you need anything else, just let me know. These are pretty e-z to do. Thanks

Document ID# XXXXX
2000 Chevrolet Venture

 

Water Pump Replacement

Removal Procedure

  1. Drain the cooling system until the coolant is below the level of the water pump.
    Object Number: 368805  Size: SH

  2. Remove the drive belt guard.
  3. Loosen the water pump pulley bolts.
  4. Remove the drive belt.
    Object Number: 30978  Size: SH

  5. Remove the water pump pulley bolts.
  6. Remove the water pump pulley.
    Object Number: 30996  Size: SH
  7. Remove the water pump bolts.
  8. Remove the water pump.
  9. Remove the water pump gasket.
  10. Clean the water pump mating surfaces.

Installation Procedure


    Object Number: 30996  Size: SH
  1. Install the water pump gasket.
  2. Install the water pump.

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the water pump bolts.

    Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 30978  Size: SH

  4. Install the water pump pulley. Loosely install the mounting bolts.
  5. Install the drive belt.
  6. Install the water pump pulley bolts.

    Tighten
    Tighten the bolts to 25 N·m (18 lb in).


    Object Number: 368805  Size: SH

  7. Install the drive belt guard.
  8. Fill the cooling system.
  9. Inspect the cooling system for leaks.

Document ID# XXXXX
2000 Chevrolet Venture

Related Chevy Questions